Opening the bootloader for OpenHardware projects 
improve and implement advanced features at the boot of your SoC/CPU, we are, in this post, considering Barebox (formely known as u-boot v2) as another open bootloader. Barebox aims at giving the developer and embedded users the best of u-boot (space, easy-to-flash, handy tools) and the best of the Linux kernel (Kconfig, Kbuild, standards C API, building methods identical to the kernel with ARCH/CROSS primitives...).
The latest documentation for barebox can be found here 2 and lists the different key features of barebox that can listed as followed:
- A posix based file API: inside barebox the usual open/close/read/write/lseek functions are used. This makes it familiar to everyone who has programmed under unix systems.
- Usual shell commands like ls/cd/mkdir/echo/cat,...
- The environment is a file store. It has currently some limitations, of course. The environment is not a real read/write filesystem, it is more like a tar archive, or even more like an ar archive, because it cannot handle directories. The saveenv command saves the files under a certain directory (by default /env) in persistent storage (by default /dev/env0). There is a counterpart called loadenv, too.
- Real filesystem support: The loader starts up with mounting a ramdisk on /. Then a devfs is mounted on /dev allowing the user (or shell commands) to access devices. Apart from these two filesystems there is currently one filesystem ported: cramfs. One can mount it with the usual mount command.
- Device/driver model: Devices are no longer described by defines in the config file. Instead there are devices which can be registered in the board .c file or dynamically allocated. Drivers will match upon the devices automatically.
- Clocksource support: Timekeeping has been simplified by the use of the Linux clocksource API. Only one function is needed for a new board, no gset_timermasked() or reset_timermasked() functions.
- Kconfig and Kernel build system: Only targets which are really needed get recompiled. Parallel builds are no problem anymore. This also removes the need for many many ifdefs in the code.
- Simulation target: barebox can be compiled to run under Linux. While this is rather useless in real world this is a great debugging and development aid. New features can be easily developped and tested on long train journeys and started under gdb. There is a console driver for linux which emulates a serial device and a tap based ethernet driver. Linux files can be mapped to devices under barebox to emulate storage devices.
- Device parameter support: Each device can have a unlimited number of parameters. They can be accessed on the command line with <devid>.<param>="...", for example 'eth0.ip=192.168.0.7' or 'echo \$eth0.ip'
- Initcalls: Hooks in the startup process can be archieved with *_initcall() directives in each file.
- Getopt: There is a small getopt implementation. Some commands got really complicated (both in code and in usage) due to the fact that U-Boot only allowed positional parameters.
- Editor: Scripts can be edited with a small editor.
Barebox is under GPLv2 licence.